Uwatec X-Tek Especificaciones descargar pdf (Pagina 4)

English

WARNING

In accordance with European standards, our BCs can only be considered certied where

all components are present, as per the original SCUBAPRO conguration, including the

low pressure hose supplied.

Any variation of the original conguration invalidates conformity to European certication

standards.

EN250:2000 norm regulations and what they mean

The requirements and tests dened by the EN 250: 2000 standard aim to ensure a minimum

safety level for the operation of underwater breathing equipment. In Europe, the EN 250: 2000

norm denes the minimum technical standards of acceptance for recreational diving regulators. All

SCUBAPRO regulators have successfully passed the certication test required by this regulation.

Denition of ‘SCUBA’ according to EN 250: 2000

This regulation denes a SCUBA unit as a self-contained open-circuit underwater breathing

apparatus. A SCUBA unit can be composed of component groups. During use, the minimum

required component groups are elements a) to e) of the following list:

a. cylinder(s) with valve(s);

b. demand regulator(s);

c. safety device(s);

d. face mask: complete mouthpiece or half-mask for diving or complete mask;

e. carrying system.

Limitations provided by EN 250: 2000

The SCUBA unit can be comprised of separate components such as: cylinder(s), regulator(s)

and pressure gauge. The SCUBAPRO BCs described in this manual can be used with SCUBA

components units certied according to directive 89/686/EEC and EN 250: 2000 norm. The air

contained in the cylinder must comply with the requirements for breathable air dened by EN

12021 norm. The maximum operating depth is 50 meters (164 ft.) however divers must conform

to the limits set by local regulations in force at the diving location.

IMPORTANT CAUTIONS

For your protection while using SCUBAPRO life support equipment, we call your attention to the

following:

1. Use the equipment according to the instructions contained within this manual and only after

having completely read and understood all instructions and warnings.

2. Use of the equipment is limited to the uses described in this manual or for applications

approved in writing by SCUBAPRO.

3. Cylinders must only be lled with atmospheric compressed air, according to the EN 12021

norm. Should moisture be present in the cylinder, besides causing corrosion of the cylinder,

it may cause freezing and subsequent malfunction of the regulator during dives carried

out in low temperature conditions (lower than 10°C (50°F)). Cylinders must be transported

according to local rules provided for the transport of dangerous goods. Cylinder use is

subjected to the laws regulating the use of gases and compressed air.

4. Equipment must be serviced by qualied personnel at the prescribed intervals. Repairs and

maintenance must be carried out by an Authorized SCUBAPRO Dealer service facility and

with the exclusive use of original SCUBAPRO spare parts.

5. Should the equipment be serviced or repaired without complying with procedures approved

by SCUBAPRO or by untrained personnel or not certied by SCUBAPRO, or should it be

used in ways and for purposes other than specically designated, liability for the correct and

safe function of the equipment transfers to the owner/user.

1 2 3 4 5 6 7 8 9 ... 44 45

Comentarios a estos manuales

Sin comentarios

Uwatec X-Tek Especificaciones Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Aletas De Buceo Uwatec X-Tek