Uwatec X-Tek Especificaciones Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
9
English
!
WARNING
DO NOT DIVE with a BC that is damaged, leaks air, or does not function properly.
Terminate any dive as safely and quickly as possible if the BC becomes damaged, leaks
air, or does not function properly.
Avoid prolonged or repeated exposure to chlorinated water, such as in swimming pools. Wash
your BC immediately after any use in chlorinated water. Chlorinated water can oxidize fabrics
and materials on your BC, thereby shortening their life, and cause colors (especially neon) to
fade. Damage and fading from prolonged exposure to chlorinated water is specically not covered
under warranty.
!
WARNING
Special Instruction in cold water diving methods, and the specic use of this product in
cold water, is required prior to cold water diving (temperatures below 10°C/50° F). This
instruction is beyond the scope of this manual.
Low pressure Hose / Pneumatic Ination Valve
LP hose and Pneumatic Ination Valve operating pressure 95 – 200 psi (6.5 – 13.8 bar)
Low Pressure Hose Fitting threads 3/8 – 24 UNF
O-Rings - Seals EPDM – Buna/Nitrile - Silicone
!
WARNING
This product is designed to use air or nitrogen/oxygen mixtures containing up to 40%
oxygen. Use of gas mixtures with increased oxygen, or the addition of helium or other
substances, may cause corrosion, deterioration, premature aging or component failure
of metal and rubber parts. These actions may result in loss of buoyancy control or air
holding integrity of the BC, resulting in injury or death. Non-standard gas mixtures may
also present a risk of re or explosion. Use only nitrogen/oxygen mixtures containing up
to 40% oxygen.
X-TEK Systems
X-TEK PURE TEK SYSTEM
Specically to the needs of the Pure TEK tailored jacket.
Donut Wing with 18 kg* (180 Lift N for max. bottle size 2x12l) buoyancy, SCUBAPRO Power Inator.
Donut Wing with 18 kg* (180 Lift N for max. bottle size 2x12l) buoyancy, SCUBAPRO TEK Inator.
Donut Wing with 13 kg* (135 Lift N for max. bottle size 15l) buoyancy, SCUBAPRO Power Inator.
Pure TEK Harness: Pure TEK System, stainless steel backplate, 50 mm high-strength strap, 3
D-Rings, belt strap, crotch, belt stopper, single tank adapter.
X-TEK PURE TEK SYSTEM, Doubletank
Specically to the needs of the Pure TEK tailored jacket.
Donut Wing with 27 kg* (270 Lift N for max. bottle size 2x12l) buoyancy , SCUBAPRO Power Inator.
Donut Wing with 27 kg* (270 Lift N for max. bottle size 2x12l) buoyancy, SCUBAPRO TEK Inator.
Pure TEK Harness: Pure TEK System, stainless steel backplate, 50 mm high-strength strap, 3
D-Rings, belt strap, crotch, belt stopper, single tank adapter.
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Comentarios a estos manuales

Sin comentarios