Uwatec X-Tek Especificaciones descargar pdf (Pagina 15)

English

Assembling the optional cape(top):

1) Secure the top cap with the  rst leash around the

shoulder strap

2) Repeat on the other side

Assembling the optional cap (bottom):

1) Thread the lower strap of the top cap through the loop

on the back of the wing

2) Secure the top cap lower strap with the Velcro on it´s

inside

Assembling the optional cape (side):

1) Attach the small plastic clip to the bungee that holds

your wing on the harness

12. AFTER THE DIVE

Cleaning the BC, Check, Storage and Transport:

Correct servicing and maintenance guarantees you many years reliable function of your SCUBAPRO

X-TEK BC.

Keep the following instructions for care:

• Fill the bladder with fresh water and shake so that the water reaches everywhere.

• Keep the bladder upside down and press the exhaust button on the in ator so that all the water can drain.

• Disinfect the inner bladder on a regular basis to prevent bacterial growth.

• Rinse the outer shell thoroughly with fresh water.

• Clean all valves so that possible dirt is removed.

• Place a small amount of silicone on the quick release collar for the power in ator attachement (SCUBAPRO

silicone

grease).

• Slightly in ate the bladder and hang it up for drying. Do not dry or store the bladder in direct sunlight.

• Dry store the BC slightly in ated in a cool dry place, protected from direct sunlight.

Inspection and Service Interval:

For your safety your BC should be inspected and maintained at an Authorized SCUBAPRO Service Center at least once

a year, more often if you dive frequently. Any damage caused due to failure to properly maintain the BC is not covered by

the warranty.

13. TRANSPORT OF THE X-TEK SYSTEMS:

Handle the XTEK systems in such a way to ensure that no sharp or heavy objects (e.g. knives, bottles, lamps, lead etc.)

damage the harness, bladder, or in ators.

9865 - Scubapro Manuale X-TEK SIDEMOUNT - totale.indb 15 10/12/2013 10:23:18

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Sin comentarios

Uwatec X-Tek Especificaciones Pagina 15